Qualidade de Água

Pressão, Umidade e CO₂

Descargas Atmosféricas

Linhas de Transmissão

Sondagem Atmosférica

Banco de Dados

Meteorologia

Hidrologia

Aviação

Aplicações de Defesa

Radar Meteorológico

Wind Profiler

UMIDADE E TEMPERATURA

informações didáticas sobre esta família de produtos

Consulte nosso especialista
Nascimento

suporte p/ esta família de produtos

A série de Transmissores de Temperatura e Umidade HUMICAP® é utilizada para aplicações industriais, onde são importantes medidas estáveis .

Características/Vantagens:
- 6 modelos para aplicação industrial:
- HMT 331 - Para montagem em parede
- HMT 333 - Para dutos e espaços confinados
- HMT 334 - Para aplicações de altas pressões e vácuo
- HMT 335 - Para temperaturas altas
- HMT 337 - Para alta umidade
- HMT 338 - Para linhas pressurizadas

Características Gerais:
- Medidas de Umidade Relativa: 0 - 100% RH
- Faixa de Temperatura até + 180 °C( 356°F), dependendo do modelo
- Tolerância a pressão até 100 bar, dependendo do modelo
- Sensor Humicap® Vaisala com excelente precisão e estabilidade
- Display gráfico para tendências de medida e 1 ano de armazenagem
- Excelente performance em ambientes químicos agressivos
- Invólucro IP 65 resistente à corrosão
- Rastreável ao NIST ( certificado incluso)

hmt330.pdf

Transmissores Vaisala Humicap® série HMT 360 são ideais para medidas de umidade em áreas perigosas. Eles operam de forma segura e confiável, mesmo em áreas de classificação
mais perigosa. A linha HMT 360 atende aos mais rigorosos padrões de tecnologia internacional.

- Medidas de umidade e temperatura, saída para ponto de orvalho,mixing ratio, umidade absoluta e temperatura de bulbo úmido.
- Operações seguras com o transmissor em áreas perigosas: Divisão 1 e 2 (USA, Canadá),Categoria 1G/Zona 0 e1D/Zona 20 com cobertura de proteção (EU).
- Intrinsecamente segura
- Destinada para condições severas
- Humicap® Vaisala incorpora alta precisão, excelente estabilidade ao longo do tempo, e erro desprezível de histerese.
- 5 sondas intercambiáveis
- Temperatura entre -40......+180°C ( -40....+356°F), dependendo da opção de sonda
- Rastreável ao NIST(certificado incluso)

HMT 360 oferece 6 tipos de sondas para várias aplicações;
- HMP 361 - Para montagem em parede
- Faixa de temperatura: -40.....+60°C(-40.....+140°F)
- Diâmetro da cabeça do sensor: 12 mm

HMP 363 - Para espaços confinados
Faixa de temperatura:
a) para cabo de teflon: -40.....+180°C (-40.....+356°F )
b) para cabo de plástico: -40.....+60°C (-40.....+140°F)
Diâmetro da cabeça do sensor: 12 mm

HMP 364 - Para alta pressão
- Faixa de temperatura: -40.....+60°C (-40.....+140°F )
- Faixa de pressão: 0....10Mpa
- Comprimento do cabo do sensor: 2, 5 ou 10 metros
- Diâmetro da cabeça do sensor: 12 mm

HMP 365 - Para alta temperatura
- Faixa de temperatura: -40.....+180°C (-40.....+356°F )
- Comprimento do cabo do sensor: 2, 5 ou 10 metros
- Diâmetro da cabeça do sensor: 13,5 mm

HMP 367 - Para alta umidade
- Faixa de temperatura: -40.....+180°C (-40.....+356°F )
- Comprimento do cabo do sensor: 2, 5 ou 10 metros
- Diâmetro da cabeça do sensor: 12 mm

HMP 368 - Para linhas pressurizadas
- Faixa de temperatura: -40.....+180°C (-40.....+356°F )
- Faixa de pressão: 0.....4mPa
- Comprimento do cabo do sensor: 2, 5 ou 10 metros
- Diâmetro da cabeça do sensor: 13,5/12 mm

hmt360.pdf

The Vaisala DEWCAP Precision SAW Hygrometer DM500 offers excellent measurement performance in an easy-to-use instrument with the new Surface Acoustric Wave (SAW) Technology.

The DM500 is a choice for calibration laboratories and for use as a transfer standard. Due to its rugged sensing technology, the DM500 is also suitable for use in industrial applications such as metal treatment process.

The innovative Vaisala DEWCAP Sensor offers advantages with high accuracy and reliable dewpoint measurement with excellent repeatability and fast response time. In addition, the DEWCAP technology can withstand particulate contamination and distinguish betwenn dew and frost directly.

dm500.pdf

The Vaisala DRYCAP® Hand-Held Dewpoint Meter DM70 measures dewpoint temperature accurately over a wide measurement range. The probe may be inserted directly into pressurized processes, and it responds rapidly from ambient to process conditions. The sensor withstands condensation and fully recovers from getting wet.

- Designed for industrial spot checking and field calibration
- Three models: accurate measurement ranges from -60 to +60 °C (-76 +140 °F)
- Vaisala DRYCAP® Sensor with patented autocalibration function
- Low maintenance need due to superior long-term stability
- Sensor withstands condensation
- Fast response, enhanced by Sensor Purge option
- Easy-to-use user interface
- Data can be logged and transferred to a PC via MI70 Link software
- Compact, small and light
- NIST traceable (certificate included)

dm70.pdf

The Vaisala DRYCAP® Dewpoint Transmitter DMP246 is designed for moisture control in industrial applications with extremely high temperatures.

- Measures moisture content at process temperatures up to +350 °C (+662 °F)
- Vaisala DRYCAP® Sensor for accurate, reliable, long-term stability and fast response
- Excellent long-term stability
- User-programmable, versatile and easy to use
- Easy to install, calibrate, maintain
- Two analog outputs, serial interface
- Optional alarm relays and local display
- NIST traceable (certificate included)

dmp246.pdf

The Vaisala DRYCAP® Dewpoint Transmitter DMP248 is designed for industrial applications with dry conditions. It meets the requirements for demanding applications and offers a variety of options. - Measures dewpoints from -50 °C to +80 °C (-58...+176 °F) with the accuracy of ±2 °C (±3.6 °F)
- Vaisala DRYCAP® Sensor provides accurate, reliable measurement with excellent long-term stability and fast response
- Withstands condensation
- Unique auto-calibration feature
- Two analog outputs and a serial interface
- Optional alarm relays, and local display and mains power supply module
- User-programmable, versatile and easy-to-use
- Easy to install, calibrate and maintain
- NIST traceable (certificate included)
- Compatible with Vaisala DRYCAP® Hand-Held Dewpoint Meter DM70

dmp248.pdf

The Vaisala DRYCAP® Dewpoint Transmitter DMT142 is a miniature dewpoint measurement instrument for industrial OEM applications like air dryers and plastic dryers. Due to its compact size and low-maintenance technology, dewpoint measurement can now be included in even the smallest air dryers.

- Miniature size dewpoint transmitter for e.g. small industrial dryer applications
- Vaisala DRYCAP® technology with auto-calibration
- Long calibration interval saves maintenance costs
- Dewpoint measurement range -50…+60 °C (-76…+140 °F) with an accuracy ±3 °C (±5.4 °F)
- Withstands condensation
- Fast response time
- Can be installed directly into systems at 50 bara (725 psia) maximum pressure
- IP65 (NEMA 4) housing protects from dust, dirt and splashed water
- Compatible with Vaisala DRYCAP® Hand-Held Dewpoint Meter DM70
- NIST traceable (certificate included)

dmt142.pdf

The Vaisala DRYCAP® Dewpoint Transmitter DMT242 provides reliable and stable measurements for low dewpoint industrial dryer applications. It provides fast response time and wide measurement range: measuring from -60 to +60 °C (-76…+140°F) with an accuracy ±2 °C (±3.6 °F) over the entire specified process temperature range.

- Ideal choice for low dewpoint industrial dryer applications
- Incorporates advanced Vaisala DRYCAP® Sensor and enhanced auto-calibration software
- Long-term stability in low dewpoints
- Fast response time
- Wide dewpoint measurement range from -60…+60 °C (-76…+140 °F) with an accuracy ±2 °C (±3.6 °F)
- Withstands condensation
- IP65(NEMA 4) housing provides protection against dust, dirt and splashed water
- Can be installed directly into systems at 20 bar maximum pressure
- NIST traceable (certificate included)
- Compatible with Vaisala DRYCAP® Hand-Held Dewpoint Meter DM70

dmt242.pdf

The wall mount Vaisala HUMICAP® Dewpoint Transmitter DMW19 is designed for use in air conditioning and other indoor wall mount applications where accurate and stable dewpoint measurement is required.

DMW19 is an ideal choice for demanding building automation applications where dewpoint is the preferred parameter for humidity measurement.

- Designed for demanding building automation applications and other wall mount indoor applications where dewpoint measurement is needed
- Dewpoint measurement range -20...+55 °C Td (-4...+131 °F Td)
- Accuracy ±2 °C Td • Vaisala HUMICAP® Sensor for excellent accuracy and long-term stability, negligible hysteresis and resistance to dust and most chemicals.
- Electronic, on site, one-point field check with Vaisala HUMICAP® Hand-Held Humidity and Temperature Meter HM70

dmw19.pdf

The Vaisala HUMICAP® Hand-Held Humidity and Temperature Meter HM34 provides a fast and convenient way to accurately spot-check relative humidity and temperature.

- Ideal for spot checking humidity levels
- Measurement range 0...100 %RH
- Fast response with ±2% accuracy
- Temperature measurement range -20...+60 °C (-4…+140 °F)
- Lightweight, pocket-sized
- Incorporates Vaisala HUMICAP® Sensor that provides high accuracy, excellent long-term stability, neglible hysteresis, and insensitivity to dust and most chemicals
- Extendable probe
- Automatic POWER-OFF
- Available in either °F or °C
- NIST traceable (certificate included)

hm34.pdf

Excess moisture in structures can cause problems and economical losses. In new construction, the tight time schedule may not allow enough time for structures to dry completely. Later, excess moisture can cause surface deterioration, room air impurities, and in severe cases – mold. These problems often lead to expensive repairs.

- Meets the new ASTM standard The Vaisala HUMICAP® Structural Humidity Measurement Kit HM44 is the ideal solution for measuring humidity in concrete. The HM44 includes the following parts:
- HMI41 Indicator with batteries
- HMP44 RH & T Probes
- Protective cover with lid, 3 pcs (19268HM)
- Rubber plugs, 12 pcs (19267HM)
- Plastic tube set, 12 pcs (19266HM)
- Carrying case
- NIST traceable (certificate included Accessories needed for wet concrete installations:
- Plastic tube set, 12 pcs (19266HM)
- Plastic flange set, 12 pcs (26529HM)
- Long rubber plug set, 12 pcs (25630HM)

hm44.pdf

The Vaisala HUMICAP® Hand-Held Humidity and Temperature Meter HM70 is a user-friendly meter for demanding spot-checking humidity measurements. It is ideal for field checking and calibration of Vaisala's fixed humidity instruments.

- Multilingual user interface
- Shows measurement trends graphically
- Proven Vaisala HUMICAP® Sensor technology
- 3 probes, temperature measurement ranges between -70 and +180 °C
- Multiprobe operation; dewpoint and CO2 probes can also be connected
- Displays various humidity parameters
- Sensor preheat and chemical purge options for demanding conditions
- Data can be logged, and transferred to a PC via MI70 Link software
- Rugged and reliable - even in extreme conditions
- NIST traceable (certificate included)

hm70.pdf

The Vaisala HUMICAP® Humidity Indicator HMI41 fitted with the Vaisala HUMICAP® Humidity and Temperature Probe HMP46 can be used for spot checking humidity and temperature in ducts or chambers. Typical applications are plant maintenance, installation and inspection of air conditioning systems, production and storage areas and production processes. In addition, it is suitable for field checking Vaisala's humidity transmitters.

- RH measurement range 0...100 %RH
- Temperature measurement range -40...+100 °C (-40…212 °F), for short periods up to +180 °C (+356 °F)
- Calculates dewpoint, wet bulb temperature, absolute humidity and mixing ratio
- Versatile and easy-to-use
- Incorporates Vaisala HUMICAP® Sensor
- Excellent stability
- Data collection with serial line download capability
- NIST traceable (certificate included)
- Optional carrying case and calibration cable
- Available as a complete calibration kit HMK41

hmi41.pdf

hmi41_26hmp46.pdf

No measuring instrument stays accurate by itself. It is essential that the functioning of an instrument is periodically checked against a reference. Vaisala has developed the Vaisala Humidity Calibrator HMK15 to make calibration and spot checking of humidity probes and transmitters easy and reliable.

- Easy and reliable calibration of humidity probes and transmitters
- Based on saturated salt solutions
- Fast temperature equilibration
- No external power required
- Suitable for laboratory use and onsite checks
- Chambers and transit covers make HMK15 easy to transport
- Pre-measured certified salts available
- Vaisala Service Centers offer accredited calibrations for humidity, temperature and barometric pressure.

hmk15.pdf

The DTR503A shield provides protection from both scattered and direct solar radiation, and precipitation. The Vaisala HUMICAP® Humidity and Temperature Probes HMP45A and HMP45D are designed for a wide range of instrumentation (e.g. recorders, data loggers, laboratory equipment andweather stations.)

The probes interface easily, are simple to service, operate from a wide range of supply voltages and consume little power.

The HMP45A/D is an excellent solution for measuring humidity in weather stations. However, the Vaisala HUMICAP® Humidity and Temperature Transmitter HMP337, with warmed sensor head, is a better solution if condensation continuously disturbs measurement.

- Vaisala HUMICAP® Humidity and Temperature Probes HMP45A/D provide up to 100 %RH with high accuracy
- Vaisala HUMICAP® Sensor for excellent accuracy, negligible hysteresis and long-term stability in high humidities, and is resistance to dust and most chemicals.
- Easy field calibration
- Vaisala Solar Radiation Shield DTR503A
- IP65 (NEMA 4) housing protects against dust, water spray, and electromagnetic interference.
- NIST traceable (certificate included)

hmp45a_d.pdf

hmp45ad.pdf

The Vaisala INTERCAP® Humidity and Temperature Probe HMP50 is a simple and cost effective humidity transmitter suitable for volume applications or integration into other manufacturers' equipment.

- Miniature-size humidity transmitter
- Very low power consumption
- Short power-up time
- Measurement range 0...98 %RH and -10...+60 °C (+14…+140 °F)
- Cable detachable with standard M8 quick connector
- Rugged metal housing
- Interchangeable Vaisala INTERCAP® Sensor
- Optional outputs and cable lengths

hmp50.pdf

The Vaisala HUMICAP® Dewpoint Transmitter HMP247T was developed to monitor the air intake of gas and liquid-fuelled power turbines.

It is ideal for measuring in water vapor injection applications because the sensor has been optimized for high humidity environments by utilizing a patented, warmed sensing probe. Water vapor is added to the intake of the turbine to increase the mass flow which in turn increases compression and electrical power output.

- Designed for high humidity applications
- Measurement range: -40…+100 °C
- Patented, warm sensor
- Incorporates HUMICAP® Sensor for excellent accuracy and long-term stability, negligible hysteresis and resistance to dust and most chemicals
- Outer cover provides protection from rain and direct sunlight
- NIST traceable (certificate included)

hmp247t.pdf

The Vaisala HUMICAP® Humidity and Temperature Transmitter Series HMT100 are designed for humidity and temperature monitoring in demanding environments.

Typical applications include stability rooms, HVAC, livestock farms, greenhouses, indoor swimming pools, and outdoor applications.

- Full 0 ... 100 %RH measurement
- Two-wire loop-powered or three-wire voltage output configurations
- Fixed and remote probe models
- Display available
- Relative humidity, dewpoint, temperature outputs
- Vaisala HUMICAP® sensor
- Interchangeable probe module for minimal maintenance downtime
- Di?erent output scalings
- Compatible with hand-held HM70 and HMI41 for one-point calibration
- IP65 (NEMA 4) housing
- NIST traceable (certi?cate included)

hmt100.pdf

Transmissores Vaisala Humicap® série HMT 360 são ideais para medidas de umidade em áreas perigosas. Eles operam de forma segura e confiável, mesmo em áreas de classificação
mais perigosa. A linha HMT 360 atende aos mais rigorosos padrões de tecnologia internacional.

- Medidas de umidade e temperatura, saída para ponto de orvalho,mixing ratio, umidade absoluta e temperatura de bulbo úmido.
- Operações seguras com o transmissor em áreas perigosas: Divisão 1 e 2 (USA, Canadá),Categoria 1G/Zona 0 e1D/Zona 20 com cobertura de proteção (EU).
- Intrinsecamente segura
- Destinada para condições severas
- Humicap® Vaisala incorpora alta precisão, excelente estabilidade ao longo do tempo, e erro desprezível de histerese.
- 5 sondas intercambiáveis
- Temperatura entre -40......+180°C ( -40....+356°F), dependendo da opção de sonda
- Rastreável ao NIST(certificado incluso)

HMT 360 oferece 6 tipos de sondas para várias aplicações;
- HMP 361 - Para montagem em parede
- Faixa de temperatura: -40.....+60°C(-40.....+140°F)
- Diâmetro da cabeça do sensor: 12 mm

HMP 363 - Para espaços confinados
Faixa de temperatura:
a) para cabo de teflon: -40.....+180°C (-40.....+356°F )
b) para cabo de plástico: -40.....+60°C (-40.....+140°F)
Diâmetro da cabeça do sensor: 12 mm

HMP 364 - Para alta pressão
- Faixa de temperatura: -40.....+60°C (-40.....+140°F )
- Faixa de pressão: 0....10Mpa
- Comprimento do cabo do sensor: 2, 5 ou 10 metros
- Diâmetro da cabeça do sensor: 12 mm

HMP 365 - Para alta temperatura
- Faixa de temperatura: -40.....+180°C (-40.....+356°F )
- Comprimento do cabo do sensor: 2, 5 ou 10 metros
- Diâmetro da cabeça do sensor: 13,5 mm

HMP 367 - Para alta umidade
- Faixa de temperatura: -40.....+180°C (-40.....+356°F )
- Comprimento do cabo do sensor: 2, 5 ou 10 metros
- Diâmetro da cabeça do sensor: 12 mm

HMP 368 - Para linhas pressurizadas
- Faixa de temperatura: -40.....+180°C (-40.....+356°F )
- Faixa de pressão: 0.....4mPa
- Comprimento do cabo do sensor: 2, 5 ou 10 metros
- Diâmetro da cabeça do sensor: 13,5/12 mm

hmt360n.pdf

The two and three-wire Vaisala INTERCAP® Humidity and Temperature Transmitters HMD/W40 and HMD/W50 are designed for use in energy management systems in buildings. They combine excellent stability with easy installation and reliable operation. The HMD40/50 are for duct installations and the HMW40/ 50 for wall installations.

- Specially designed for building energy management systems
- 10...90 %RH measurement
- -10...+60 °C (+14…+140 °F) operating range for duct units
- -5...+55 °C (+23…+131 °F) operating range for wall units
- 4...20 mA 2-wire output (HMD/W40)
- Selectable voltage 3-wire output (HMD/W50)
- Combines excellent stability with easy installation and reliable operation
- No recalibration
- Fully interchangeable Vaisala INTERCAP® Sensor is easy to replace
- Low cost

hmw40_50.pdf

The duct and wall-mounted Vaisala HUMICAP® Humidity and Temperature Transmitters HMD/W60 and HMD/ W70 are designed for monitoring relative humidity and temperature in building energy management systems.

The combination of high accuracy, stability and reliable operation, make these products the ideal choice for demanding applications.

- Full 0...100 %RH measurement
- Accuracy up to ±2 %RH
- True two-wire transmitters with 4...20 mA loop powered output (HMD60 and HMW60)
- Selectable signal output of 0...1 V, 0...5 V or 0...10 V (HMD70 and HMW70) with optional current module also 0...20 mA (HMD70)
- Vaisala HUMICAP® Sensor for excellent accuracy and long-term stability, negligible hysteresis and resistance to dust and most chemicals.
- Temperature compensated
- IP65 (NEMA 4) housing (duct unit only)
- Also available as temperature-only transmitters HMD/W 60T/70T
- NIST traceable (certificate included)
- Compatible with Vaisala HUMICAP® Hand-Held Humidity and Temperature Meter HM70

hmw60_70.pdf