|
|
Eletrodos, Sondas e Acessórios
|
ELETRODOS, SONDAS E ACESSÓRIOS
|
|
informações
didáticas sobre esta família de produtos
|
|
Consulte nosso especialista
Nascimento
suporte p/ esta família de produtos
|
|
|
|
|
OOS31 Amperometric Dissolved Oxygen Sensor
Submersible amperometric sensor for use in industrial wastewater and water applications
Sensor operates in dual mode:
Analog mode when connected to standard instruments
Digital mode with Model 840/842 analyzer
Digital mode - calibration data is stored in the sensor allowing remote calibration before installation. Calibration data is automatically transferred to analyzer
Three electrode measurement principle for exceptional stability
Only requires single point calibration in air
Membrane cartridge is designed for durability and ease of maintenance
Standard and fast response versions available
Sensor monitors membrane performance
Corrosion resistant stainless steel body is ideal for industrial wastewater applications
Available NEMA 6 rated detachable cable system provides the convenience of a quick connect with the reliability of a fixed cable
Each electrode is factory serialized and performance tested
|
 OOS31TI.pdf
|
|
|
|
|
|
OOS 41 Membrane-covered amperometric sensor
Applications:
Continuous measurement of the concentration of dissolved oxygen in water plays a vital role in many sectors of water engineering:
- Sewage treatment plants: O2 measurement and regulation in activated sludge basins to achieve high efficiency in the biological cleaning process
- Water monitoring: Measuring O2 in rivers, lakes and in the sea as an indicator for water quality
- Water treatment: O2 measurement, e.g. in drinking water to check the condition (O2 enrichment / corrosion prevention etc.)
- Fish farming: O2 measurement and regulation to maintain optimum survival and growth conditions
Features and benefits
- Membrane-covered sensor, therefore high O2 selectivity
- Minimum maintenance requirements
- Minimum calibration effort through simple air calibration. No zero calibration required
- Very high measuring reliability
- High long-term stability
- Due to disconnectable cable connection on sensor side (TOP 68 plug-in connector) easy to maintain.
- Sensor and process monitoring in conjunction with transmitter allows optimum protection from incorrect measurements.
|
TIOOS41E00.PDF
|
|
|
|
|
|
Camara de Fluxo OPA 250
Camara de Fluxo para medida em linha suporta até três eletrodos.
|
|
|
|
|
|
|
Sonda de Íons Seletivos para Fluoreto Z8069
O dispositivo de Medição de Íons de Fluoreto (IMD), o Platinum Label, é um sensor robusto de alto desempenho, construído a partir de um material de polímero inerte que incorpora uma membrana sensível ao íon. A membrana é um cristal de Fluoreto de Lantânio, que produz um pontencial proporcional à quantidade de íon fluoreto na solução. O íon fluoreto é montado com hidrogênio abaixo do pH5 e o eletrodo está sujeito à interferência do hidróxido acima do pH8, portanto, as medições precisas são somente ser feitas entre o pH5 e o pH8. Estes sensores podem ser fornecidos como equipamentos individuais ou em combinação e estão disponíveis em configurações de laboratório (12mm) ou individuais (¾ pol. MNPT).
|
Sensors Fluoreto.pdf
|
|
|
|
|
|
Sonda de Íons Seletivos para Cloreto Z80065
O dispositivo de Medição de Íons de Cloreto (IMD), o Platinum Label, é um sensor robusto de alto desempenho, construído a partir de um material de polímero inerte que incorpora uma membrana sensível ao íon. Todas as conexões no eletrodo são contatos de estado sólido, sem que haja líquidos no corpo. Estes sensores podem ser fornecidos como equipamentos individuais ou em combinação e estão disponíveis em configurações de laboratório (12mm) ou individuais (¾ pol. MNPT).
|
Sensor Cloreto.pdf
|
|
|
|
|
|
Sonda de Íons Seletivos para Cloro OCS140 e OCS141
The chlorine sensor OCS 140 is especially designed for applications with a measuring range of 0.05 ... 20 mg Cl /l. The trace chlorine sensor OCS 141 2 is especially suitable for disinfection in drinking water conditioning or for the detection of chlorine traces (measuring range 0.01 ... 5 mg Cl /l). The concentration of free active chlorine can be measured when using the following chlorination agents: NaOCl, Ca(OCl)2, Cl and electrolytically 2 generated chlorine.
|
Sonda_CL.pdf
|
|
|
|
|
|
Sonda de Íons Seletivos para Dióxido de Cloro OCS240 e OCS241
The chlorine sensor OCS 240 is suitable for applications with a measuring range of 0.05 ... 20 mg ClO /l. 2 The chlorine sensor OCS 241 is especially suitable for disinfection of drinking water conditioning or for the detection of chlorine traces (measuring range 0.01 ... 5 mg ClO /l). 2 The concentration of free active chlorine can be measured when using the following chlorinating agents: NaOCl, Ca(OCl)2, Cl2 and electrolytically generated chlorine.
|
Sonda_ClO2.pdf
|
|
|
|
|
|
Camara de Fluxo para Cloro e Dióxido de Cloro OCA250
The flow assembly OCA 250 has been especially designed to hold the chlorine sensors OCS 140 / OCS 141 or the chlorine dioxide sensors OCS 240 / OCS 241. Additionally two mounting positions are reserved for one pH and one redox combination electrode (e.g. types OPS 31-1ABO2GSA and OPS 32-0FBO2GSA).
Areas of application
Other process applications
|
Camara_Fluxo_Cl_ClO2.pdf
|
|
|
|
|
|
Transmissor de Condutividade com Sensor Indutivo OLD 633
The compact transmitter OLD 633 is
used for inductive conductivity
measurement in liquids of medium to
high conductivity such as e.g. for
process monitoring in galvanics. The
transmitter can be used in
temperature ranges of up to 70 °C.
Applications
Water treatment
Humidifiers and separators
Cleaning plants
Alkali monitoring
|
Transm_Condutividade_OLD 633.pdf
|
|
|
|
|
|
Sensores de Condutividade Indutivos OLS50 / OLS52
Highly resistant Inductive Conductivity
Sensor for Standard and High-Temperature
Applications
|
Sensor_Condutividade_Indutivo.pdf
|
|
|
ial" color="#000080">Turb_OUS31.pdf
Turb_OUS41.pdf
|
